FlexFence louvered pergola - Step 1

FlexFence louvered pergola - Step 2

FlexFence louvered pergola - Step 3

FlexFence louvered pergola - Step 4

FlexFence louvered pergola - Step 5

FlexFence louvered pergola - Step 6

Click here to download PDF format (334 Kb)

Material Listing

• 9/kitsFLEX•fence ®
• 4/pcs. -FLEX•Post brackets (optional)
• 4/pcs.- 4" x 4" x 12’
• 4/pcs.-2" x 6" x 14’
• 2/pcs.-2" x 6" x 12’
• 2/pcs.-2" x 4" x 12’
• 6/pcs.-2" x 4" x 46"
• 99/pcs.-1" x 6" x 44 ¾"
• 56/pcs. - #8-2" wood screws
• 1" finishing nails
• 18/pcs. - 3/16th x 1 ¾" machine eyebolts with appropriate nuts,
• washers and t-nuts
• 18/pcs -Rope or dowels with hooks to operate the louvers
• Exterior grade carpenter's glue

Tools Required

• Pencil
• Measuring Tape
• #1 Robertson Screw Driver-Green Handle or (Philips Screw Driver)
• #2 Robertson Screw Drive-Red Handle (Philips -Screw Driver)
• Hand Saw
• Hammer
• Chissel
• Combination Square
• Protective Eyewear
• Level

Optional Tools

• Drill with appropriate bits & counter sink bit
• Router with decorative bits
• Power saws - Mitre & Skill

Howie's Tips

1. When attaching the FLEX•fence ® brackets onto the rails allow for the brackets to move freely (swivel). Do not over tighten!
2. When sizing FLEX•fence ® always cut the rails and operating bar with hand tools and never with power tools.
3. Always wear protective goggles.

Note: The drawings are to be used as a guide only.

Back to Do-it-yourself Projects home

Back to top