FLEX•fence
Louver Hardware
Site Search:
The Hardware
FAQ
Slideshow
Photo Gallery
Photo Gallery by Applications
Do-it-yourself Projects
Videos
Literature
Testimonials
Media Coverage
Retail Links
About us

Do-it-yourself Projects
Project 5 - Semi Louvered Deck Railing

Let me show you how to build a 6' wide Flexfence semi louvered deck railing FlexFence semi louvered deck railing, animation

Cut list - Flexfence semi louvered deck railing Cut list - Flexfence semi louvered deck railing
Cut list - Flexfence semi louvered deck railing

Click here to download PDF format (90 Kb)

Material Listing

  • 1 /kit FLEX•fence ®
  • cut track into 2 sections measuring 22" each. (leave 3 " from 1st pre-punched hole)
  • 2/pcs. - 4" x 4" x 4’
  • 10/pcs. - 1" x 6" x 31¾"
  • 6/pcs. –1" x 6" x 24 ¾"
  • 2/pcs.-1" x 4" x 36"
  • 2/pcs. – 2" x 4" x 33"
  • 2/pcs. – 2" x 4" x 69"
  • 1" finishing nails
  • Exterior grade carpenter's glue

Tools Required

  • Pencil
  • Measuring Tape
  • #1 Robertson Screw Driver-Green Handle or (Philips Screw Driver)
  • #2 Robertson Screw Drive-Red Handle (Philips -Screw Driver)
  • Hand Saw
  • Hammer
  • Chissel
  • Combination Square
  • Protective Eyewear
  • Level

Optional Tools

  • Drill with appropriate bits & counter sink bit
  • Router with decorative bits
  • Power saws - Mitre & Skill

Howie's Tips

  1. When attaching the FLEX•fence ® brackets onto the rails allow for the brackets to move freely (swivel). Do not over tighten!
  2. When sizing FLEX•fence ® always cut the rails and operating bar with hand tools and never with power tools.
  3. Always wear protective goggles.

Note: The drawings are to be used as a guide only.


Back to Do-it-yourself Projects home Back to top

Copyright © Consolaid Inc. - FLEX•fence | Site Map
sales@flexfence.com Toll Free 1.888.599.FLEX (3539)