|
|
Do-it-yourself Projects
Project 14 - Pictorial On The Construction of a 4 Post Deck Roof 12' X 12' X 10'
Step 1. Construct frame |
Step 2. Attach Flexfence |
Step 3. Remember to offset rails if mounting onto 2" X 6"
(See package instructions) |
Step 4. Attach 1" X 6" into Flexfence brackets |
Step 5. Finishing 2 Post Deck Roof |
Howie's Tips
- Once your Roof is constructed, create drainage (drill holes) in wood marked 'A' in Roof Plans and on bottom of the Planters.
- When attaching the FLEX•fence ® brackets onto the rails allow for the brackets to move freely (swivel). Do not over tighten!
- When sizing FLEX•fence ® always cut the rails and operating bar with hand tools and never with power tools.
- Always wear protective goggles.
Note: The drawings are to be used as a guide only.
|
