FLEX•fence
Louver Hardware
Site Search:
The Hardware
FAQ
Slideshow
Photo Gallery
Photo Gallery by Applications
Do-it-yourself Projects
Videos
Literature
Testimonials
Media Coverage
Retail Links
About us

Do-it-yourself Projects
Project 12 - Board on Board Fence with Louver Top - 8 ft. Section

Let me show you how to build a board on board fence with FlexFence hardware Building a Board on Board Fence with Louver Top - 8 ft. Section

Building a Board on Board Fence with Louver Top - 8 ft. Section
Building a Board on Board Fence with Louver Top - 8 ft. Section

Click here to download PDF format (98 Kb)

Material Listing

  • 2/kit FLEX•fence ® Cut the kit to 42" (leave 3" space from pre-punched holes on each end)
  • 2/pcs.- 4" x 4" x 84"
  • 1/pcs.- 4" x 4" x 77 "
  • 18/pcs.- 1" x 6" x 21 ¼"
  • 20/pcs.- 1" x 6" x 45"
  • 10/pcs.- 2" x 4" x 46 ¼"
  • 1/pcs.- 2" x 6" x 120 ¼"
  • 4/pcs.- 1" x 4" x 64 "
  • 2" Spiral nails
  • Exterior grade carpenter's glue

Tools Required

  • Pencil
  • Measuring Tape
  • #1 Robertson Screw Driver-Green Handle or (Philips Screw Driver)
  • #2 Robertson Screw Drive-Red Handle (Philips -Screw Driver)
  • Hand Saw
  • Hammer
  • Chissel
  • Combination Square
  • Protective Eyewear
  • Level

Optional Tools

  • Drill with appropriate bits & counter sink bit
  • Router with decorative bits
  • Power saws - Mitre & Skill

Howie's Tips

  1. When attaching the FLEX•fence ® brackets onto the rails allow for the brackets to move freely (swivel). Do not over tighten!
  2. When sizing FLEX•fence ® always cut the rails and operating bar with hand tools and never with power tools.
  3. Always wear protective goggles.

Note: The drawings are to be used as a guide only.


Back to Do-it-yourself Projects home Back to top

Copyright © Consolaid Inc. - FLEX•fence | Site Map
sales@flexfence.com Toll Free 1.888.599.FLEX (3539)